Skip to main content
Tagasi

EVS-EN ISO 2063-1:2019

Thermal spraying - Zinc, aluminium and and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2019)

Üldinfo

Kehtiv alates 01.04.2019
Alusdokumendid
ISO 2063-1:2019; EN ISO 2063-1:2019
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
01.04.2019
Põhitekst
01.11.2017
Põhitekst
This document specifies requirements for the protection of iron and steel surfaces against corrosion by applying thermal-sprayed metallic coatings of zinc, aluminium or their alloys.
In this document, requirements for the planning of the corrosion protection system and for the constructive design of the component to be protected are specified, where thermal spraying is intended to be the process for the deposition of the metallic corrosion protection.
Some field-related basic terms are defined and instructions for corrosion behaviour of the zinc and aluminium materials under different environment conditions are provided.
Characteristic properties of the coating, e.g. coating thickness, minimum adhesive strength and surface appearance, are specified and test procedures for thermal-sprayed corrosion protection coatings of zinc, aluminium or their alloys are determined.
This document is valid for applying thermal-sprayed zinc and aluminium protection coatings against corrosion in the temperature range between −50 °C to +200 °C, taking into consideration the service conditions of any sealants used. Heat-resistant protective coatings of aluminium are covered by ISO 17834 and are not in the scope of this document.
Other corrosion protection processes, e.g. hot-dip galvanizing (galvanic coating), sherardizing, electroplating or selection and deposition of organic coatings/paints are not in the scope of this document.
Requirements for the manufacturing of thermal-sprayed coatings are specified in ISO 2063-2.

Nõutud väljad on tähistatud *

*
*
*
PDF
24,40 € koos KM-ga
Paber
24,40 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN ISO 2063-2:2017

Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017)
Uusim versioon Kehtiv alates 01.11.2017
Põhitekst

EVS-EN ISO 8503-5:2017

Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile (ISO 8503-5:2017)
Uusim versioon Kehtiv alates 04.04.2017
Põhitekst

EVS-EN ISO 12944-1:2017

Värvid ja lakid. Teraskonstruktsioonide korrosioonitõrje kaitsvate värvkattesüsteemidega. Osa 1: Üldtutvustus
Uusim versioon Kehtiv alates 02.01.2018
Põhitekst

EVS-EN ISO 12944-2:2017

Värvid ja lakid. Teraskonstruktsioonide korrosioonitõrje kaitsvate värvkattesüsteemidega. Osa 2: Keskkondade klassifikatsioon
Uusim versioon Kehtiv alates 02.01.2018