Skip to main content
Tagasi

EVS-EN ISO 2063-1:2017

Thermal spraying - Zinc, aluminium and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2017)

Üldinfo

Kehtetu alates 01.04.2019
Alusdokumendid
ISO 2063-1:2017; EN ISO 2063-1:2017
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
01.04.2019
Põhitekst
01.11.2017
Põhitekst
05.06.2005
Põhitekst
EVS-EN ISO 2063:2005
ISO 2063-1:2017 specifies requirements for the protection of iron and steel surfaces against corrosion by applying thermal-sprayed metallic coatings of zinc, aluminium or their alloys.
In ISO 2063-1:2017, requirements for the planning of the corrosion protection system and for the constructive design of the component to be protected are specified, where thermal spraying is intended to be the process for the deposition of the metallic corrosion protection.
Some field-related basic terms are defined and instructions for corrosion behaviour of the zinc and aluminium materials under different environment conditions are provided.
Characteristic properties of the coating, e.g. coating thickness, minimum adhesive strength and surface appearance, are specified and test procedures for thermal-sprayed corrosion protection coatings of zinc, aluminium or their alloys are determined.
ISO 2063-1:2017 is valid for applying thermal-sprayed zinc and aluminium protection coatings against corrosion in the temperature range between -50 °C to +200 °C, taking into consideration the service conditions of any sealants used. Heat-resistant protective coatings of aluminium are covered by ISO 17834 and are not in the scope of ISO 2063-1:2017.
Other corrosion protection processes, e.g. hot-dip galvanizing (galvanic coating), sherardizing, electroplating or selection and deposition of organic coatings/paints are not in the scope of ISO 2063-1:2017.
Requirements for the manufacturing of thermal-sprayed coatings are specified in ISO 2063-2.

Nõutud väljad on tähistatud *

*
*
*
PDF
24,40 € koos KM-ga
Paber
24,40 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN ISO 2063-2:2017

Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017)
Uusim versioon Kehtiv alates 01.11.2017
Põhitekst

EVS-EN ISO 12944-3:2017

Värvid ja lakid. Teraskonstruktsioonide korrosioonitõrje kaitsvate värvkattesüsteemidega. Osa 3: Projekteerimispõhimõtted
Uusim versioon Kehtiv alates 02.01.2018
Põhitekst

EVS-EN 10058:2019

Kuumvaltsitud latt-terased ja laiad ribaterased üldiseks otstarbeks. Mõõtmed, mõõtmete ja kuju tolerantsid
Uusim versioon Kehtiv alates 01.02.2019
Põhitekst

EVS-EN ISO 9934-1:2016

Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2016)
Uusim versioon Kehtiv alates 03.01.2017