Skip to main content
Tagasi

EVS-EN ISO 10819:2013

Mehaaniline vibratsioon ja löögid. Labakäe-käsivarre vibratsioon. Meetod kinnaste vibratsiooniülekande mõõtmiseks ja hindamiseks peopesast

Üldinfo

Kehtiv alates 09.09.2013
Alusdokumendid
ISO 10819:2013; EN ISO 10819:2013
Direktiivid või määrused
2016/425 Isikukaitsevahendid

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
17.07.2023
Põhitekst + muudatus
01.11.2022
Muudatus
01.03.2019
Muudatus
09.09.2013
Põhitekst
This International Standard specifies a method for the laboratory measurement, data analysis, and reporting of the vibration transmissibility of a glove with a vibration-reducing material that covers the palm, fingers, and thumb of the hand. This International Standard specifies vibration transmissibility in terms of vibration transmitted from a handle through a glove to the palm of the hand in one-thirdoctave frequency bands with centre frequencies of 25 Hz to 1 250 Hz. The measurement procedure specified in this International Standard can also be used to measure the vibration transmissibility of a material that is being evaluated for use to cover a handle of a machine or for potential use in a glove. However, results from this test cannot be used to certify that a material used to cover a handle meets the requirements of this International Standard to be classified as an antivibration covering. A material tested in this manner could later be placed in a glove. When this is the case, the glove needs to be tested in accordance with the measurement procedure of this International Standard and needs to meet the vibration attenuation performance requirements of this International Standard in order to be classified as an antivibration glove. NOTE ISO 13753[1] defines a method for screening materials used for vibration attenuation on the handles of machines and for gloves.

Nõutud väljad on tähistatud *

*
*
*
PDF
24,40 € koos KM-ga
Paber
24,40 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN ISO 12996:2013

Mechanical joining - Destructive testing of joints - Specimen dimensions and test procedure for tensile shear testing of single joints (ISO 12996:2013)
Uusim versioon Kehtiv alates 05.08.2013
Põhitekst

EVS-EN ISO 377:2013

Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2013, Corrected version 2015-06-01)
Kehtetu alates 02.08.2017
Põhitekst

EVS-EN 12668-3:2013

Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
Kehtetu alates 01.12.2020
Põhitekst

EVS-EN ISO 3452-2:2013

Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2013)
Kehtetu alates 20.07.2021