Skip to main content
Tagasi

EVS-EN 12668-3:2013

Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment

Üldinfo

Kehtetu alates 01.12.2020
Alusdokumendid
EN 12668-3:2013
Tegevusala (ICS grupid)
19.100 Mittepurustav katsetamine
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
01.12.2020
Põhitekst
09.12.2013
Põhitekst
08.11.2004
Muudatus
EVS-EN 12668-3:2000/A1:2004
01.10.2000
Põhitekst
EVS-EN 12668-3:2000
This European Standard describes methods and acceptance criteria for verifying the performance of ultrasonic equipment (i.e. instrument and probe combined as defined in EN 12668 1 and EN 12668 2) by the use of appropriate standard calibration blocks. These methods are not intended to prove the suitability of the equipment for particular applications. The methods described are suitable for the use by operators working under site or shop floor conditions. The methods only apply to pulse echo equipment using A-scan presentation, with gain controls or attenuators calibrated in steps not greater than 2 dB and used essentially in contact testing. These methods are specifically intended for manual testing equipment. For automated testing different tests can be needed to ensure satisfactory performance.

Nõutud väljad on tähistatud *

*
*
*
PDF
12,20 € koos KM-ga
Paber
12,20 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN ISO 3452-3:2013

Mittepurustav katsetamine. Defektoskoopilised katsed. Osa 3: Etalonblokid
Uusim versioon Kehtiv alates 09.12.2013
Põhitekst

EVS-EN ISO 2400:2012

Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012)
Uusim versioon Kehtiv alates 06.11.2012
Põhitekst

EVS-EN 12668-2:2010

Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes
Kehtetu alates 15.12.2020
Põhitekst

EVS-EN ISO 7963:2010

Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2
Kehtetu alates 15.11.2022