Skip to main content
Tagasi

EVS-EN 16407-2:2014

Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection

Üldinfo

Kehtetu alates 16.11.2018
Alusdokumendid
EN 16407-2:2014
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
16.11.2018
Põhitekst
04.02.2014
Põhitekst
This European Standard specifies fundamental techniques of film and digital radiography with the object of enabling satisfactory and repeatable results to be obtained economically. The techniques are based on generally recognized practice and fundamental theory of the subject.
This European Standard applies to the radiographic examination of pipes in metallic materials for service induced flaws such as corrosion pitting, generalized corrosion and erosion. Besides its conventional meaning, "pipe" as used in this standard should be understood to cover other cylindrical bodies such as tubes, penstocks, boiler drums and pressure vessels.
Weld inspection for typical welding process induced flaws is not covered, but weld inspection is included for corrosion/erosion type flaws.
The pipes may be insulated or not, and can be assessed where loss of material due, for example, to corrosion or erosion is suspected either internally or externally.
This part of EN 16407 covers double wall inspection techniques for detection of wall loss, including double wall single image (DWSI) and double wall double image (DWDI).
Note that the DWDI technique described in this part of EN 16407 is often combined with the tangential technique covered in EN 16407-1.
This European Standard applies to in-service double wall radiographic inspection using industrial radiographic film techniques, computed digital radiography (CR) and digital detector arrays (DDA).

Nõutud väljad on tähistatud *

*
*
*
PDF
26,84 € koos KM-ga
Paber
26,84 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN 10027-2:2015

Teraste tähistussüsteem. Osa 2: Tunnusnumbrid
Uusim versioon Kehtiv alates 06.10.2015
Põhitekst

EVS-EN ISO 9001:2015 en

Kvaliteedijuhtimissüsteemid. Nõuded
Uusim versioon Kehtiv alates 06.10.2015
Põhitekst

EVS-EN ISO 17658:2015

Welding - Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology (ISO 17658:2002)
Uusim versioon Kehtiv alates 07.05.2015
Põhitekst

EVS-EN 16407-1:2014

Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 1: Tangential radiographic inspection
Kehtetu alates 16.11.2018