Skip to main content
Tagasi

EVS-EN 15632-4:2022

District heating pipes - Factory made flexible pipe systems - Part 4: Bonded system with metal service pipes; requirements and test methods

Üldinfo

Kehtiv alates 17.05.2022
Alusdokumendid
EN 15632-4:2022
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
17.05.2022
Põhitekst
05.03.2009
Põhitekst
This document specifies requirements and test methods for flexible, factory made, buried district heating pipe systems with metallic service pipes and bonding between the layers of the pipe assemblies and thermal insulation materials of polyurethane or polyisocyanurate foam, the casing being made of polyethylene.
It is only applicable in conjunction with part 1.
This document is applicable to pipes, fittings, their joints and to joints with components made of non-plastics materials intended to be used for district heating installations.
This document is applicable to a continuous operating temperature up to 120 °C and a maximum operating temperature of 140 °C for maximum 300 h/a, and a design pressure up to 2,5 MPa for a design service life of at least 30 years.
This document does not apply to cover surveillance systems.
NOTE  For higher temperatures or for the transport of other fluids, for example potable water, additional requirements and testing is needed. Such requirements are not specified in this document.

Nõutud väljad on tähistatud *

*
*
*
PDF
15,86 € koos KM-ga
Paber
15,86 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN 15632-3:2022

District heating pipes - Factory made flexible pipe systems - Part 3: Non bonded system with plastic service pipes; requirements and test methods
Uusim versioon Kehtiv alates 01.06.2022
Põhitekst

EVS-EN 15632-2:2022

District heating pipes - Factory made flexible pipe systems - Part 2: Bonded system with plastic service pipes; requirements and test methods
Uusim versioon Kehtiv alates 01.06.2022
Põhitekst

EVS-EN 15632-1:2022

District heating pipes - Factory made flexible pipe systems - Part 1: Classification, general requirements and test methods
Uusim versioon Kehtiv alates 01.06.2022
Põhitekst + muudatus

EVS-EN 13941-2:2019+A1:2021

Kaugküttetorud. Soojusisoleeritud konsolideeritud üksik- ja kaksiktorusüsteemide projekteerimine ja paigaldamine vahetult maasse paigaldatud soojaveevõrkudele. Osa 2: Paigaldamine
Uusim versioon Kehtiv alates 31.12.2021