Skip to main content
Tagasi

EVS-EN 12201-3:2024

Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 3: Fittings

Üldinfo

Kehtiv alates 15.02.2024
Alusdokumendid
EN 12201-3:2024
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
15.02.2024
Põhitekst
05.12.2012
Põhitekst + muudatus

EN 12201-3 specifies the characteristics of fusion fittings made from polyethene (PE) as well as mechanical fittings for buried and above-ground applications. These can be intended for the conveyance of water for human consumption, raw water before treatment, drains and sewers under pressure, vacuum sewer systems, and water for other purposes, except industrial applications. The intended uses include sea outfalls, laid in water and pipes suspended below bridges. It also specifies the test parameters for the test methods referred to in EN 12201-3.

EN 12201-3 applies to PE pipes, fittings and valves, their joints and joints with components of PE and other materials intended to be used under the following conditions:

— allowable operating pressure, PFA, up to 25 bar,

— an operating temperature of 20 °C as a reference temperature.

These fittings can be of the following types:

— electrofusion socket fittings,

— electrofusion saddle fittings,

— spigot end fittings (for butt fusion using heated tools and electrofusion socket fusion),

— socket fusion fittings (see Annex A).

— mechanical fittings,

— fabricated fittings (see Annex B).

Nõutud väljad on tähistatud *

*
*
*
PDF
26,84 € koos KM-ga
PDF redline
34,89 € koos KM-ga
Paber
26,84 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN 12201-1:2024

Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 1: General
Uusim versioon Kehtiv alates 15.02.2024
Põhitekst

EVS-EN 12201-2:2024

Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 2: Pipes
Uusim versioon Kehtiv alates 15.02.2024
Põhitekst

EVS-EN 12201-4:2024

Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 4: Valves for water supply systems
Uusim versioon Kehtiv alates 15.02.2024
Põhitekst

EVS-EN 12201-5:2024

Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system
Uusim versioon Kehtiv alates 15.02.2024