Skip to main content
Tagasi

EVS-EN ISO 6508-2:2015

Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015)

Üldinfo

Kehtetu alates 29.12.2023
Alusdokumendid
ISO 6508-2:2015; EN ISO 6508-2:2015
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
29.12.2023
Põhitekst
02.04.2015
Põhitekst
08.03.2006
Põhitekst
EVS-EN ISO 6508-2:2006
This part of ISO 6508 specifies two separate methods of verification of testing machines (direct and indirect) for determining Rockwell hardness in accordance with ISO 6508-1:2015, together with a method for verifying Rockwell hardness indenters.
The direct verification method is used to determine whether the main parameters associated with the machine function, such as applied force, depth measurement, and testing cycle timing, fall within specified tolerances. The indirect verification method uses a number of calibrated reference hardness
blocks to determine how well the machine can measure a material of known hardness.
The indirect method may be used on its own for periodic routine checking of the machine in service.
If a testing machine is also to be used for other methods of hardness testing, it shall be verified independently for each method.
This part of ISO 6508 is applicable to stationary and portable hardness testing machines.
Attention is drawn to the fact that the use of tungsten carbide composite for ball indenters is considered to be the standard type of Rockwell indenter ball. Steel indenter balls may continue to be used only when complying with ISO 6508-1:2015, Annex A.

Nõutud väljad on tähistatud *

*
*
*
PDF
24,40 € koos KM-ga
Paber
24,40 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN ISO 6508-3:2015

Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015)
Kehtetu alates 29.12.2023
Põhitekst

EVS-EN ISO 6508-1:2016

Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016)
Kehtetu alates 29.12.2023
Põhitekst

EVS-EN ISO 6506-4:2014

Metallic materials - Brinell hardness test - Part 4: Table of hardness values (ISO 6506-4:2014)
Uusim versioon Kehtiv alates 07.11.2014
Põhitekst

EVS-EN ISO 6506-1:2014

Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
Uusim versioon Kehtiv alates 07.11.2014