Skip to main content
Tagasi

EVS-EN ISO 2507-1:2017

Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method (ISO 2507-1:1995)

Üldinfo

Kehtiv alates 01.11.2017
Alusdokumendid
ISO 2507-1:1995; EN 2507-1:2017
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
01.11.2017
Põhitekst
01.01.2000
Põhitekst
This part of ISO 2507 specifies a general method for determining the Vicat softening temperature of
thermoplastics pipes and fittings. It includes the adaptation of method B of ISO 306: 1994, using a force
of 50 N.
This method is applicable only to thermoplastics materials for which it is possible to measure the temperature at which their rate of softening becomes rapid.
It is not applicable to crystalline or semi-crystalline polymers.
The method specified is based on determining the temperature at which a standard indenter, under a force of 50 N ± 1 N, penetrates 1 mm into the surface of a test piece cut from the wall of a pipe or fitting while the temperature is raised at a constant rate.  Is based on ISO 306:1994 which, however, applies to materials in the form of sheets.

Nõutud väljad on tähistatud *

*
*
*
PDF
12,20 € koos KM-ga
Paber
12,20 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN ISO 2507-2:2017

Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes (ISO 2507-2:1995)
Uusim versioon Kehtiv alates 01.11.2017
Põhitekst

EVS-EN ISO 3127:2017

Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method (ISO 3127:1994)
Uusim versioon Kehtiv alates 01.11.2017
Põhitekst

EVS-EN ISO 11173:2017

Thermoplastics pipes - Determination of resistance to external blows - Staircase method (ISO 11173:1994)
Uusim versioon Kehtiv alates 01.11.2017
Põhitekst

EVS-EN ISO 13257:2017

Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2010)
Kehtetu alates 03.01.2019