Skip to main content
Tagasi

EVS-EN ISO 18275:2012

Welding consumables - Covered electrodes for manual metal arc welding of high-strength steels - Classification (ISO 18275:2011)

Üldinfo

Kehtetu alates 16.10.2018
Alusdokumendid
ISO 18275:2011; EN ISO 18275:2012
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
16.10.2018
Põhitekst
05.06.2012
Põhitekst
Põhitekst
EVS-EN 757:1999
This International Standard specifies requirements for classification of covered electrodes and deposited metal in the as-welded condition and in the post-weld heat-treated condition for manual metal arc welding of high-strength steels with a minimum yield strength greater than 500 MPa or a minimum tensile strength greater than 570 MPa. This International Standard is a combined specification providing a classification utilizing a system based upon the yield strength and an average impact energy of 47 J of the all-weld metal, or utilizing a system based upon the tensile strength and an average impact energy of 27 J of the all-weld metal. a) Subclauses and tables which carry the suffix letter “A” are applicable only to covered electrodes classified under the system based upon the yield strength and an average impact energy of 47 J of the all-weld metal given in this International Standard. b) Subclauses and tables which carry the suffix letter “B” are applicable only to covered electrodes classified under the system based upon the tensile strength and an average impact energy of 27 J of the all-weld metal given in this International Standard. c) Subclauses and tables which do not have either the suffix letter “A” or the suffix letter “B” are applicable to all covered electrodes classified under this International Standard.

Nõutud väljad on tähistatud *

*
*
*
PDF
24,40 € koos KM-ga
Paber
24,40 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN ISO 16834:2012

Keevitustarvikud. Elektroodtraadid, traadid, vardad ja räbustid kõrgtugeva terase kaitsegaaskeevituseks sulavelektroodiga. Klassifikatsioon (ISO 16834:2012)
Uusim versioon Kehtiv alates 05.06.2012
Põhitekst

EVS-EN ISO 2560:2009

Keevitusmaterjalid. Kattega elektroodid legeerimata ja peenterateraste käsikaarkeevituseks. Liigitamine
Kehtetu alates 15.01.2021
Rahvuslik lisa

EVS-EN 1993-1-3/NA:2008

Eurokoodeks 3: Teraskonstruktsioonide projekteerimine. Osa 1-3: Üldreeglid ja lisareeglid külmvormitud profiilidele ja profiilplekile. Eesti standardi rahvuslik lisa
Kehtiv alates 07.04.2008
Põhitekst

EVS-EN ISO 14174:2012

Welding consumables - Fluxes for submerged arc welding and electroslag welding - Classification (ISO 14174:2012)
Kehtetu alates 03.06.2019