Skip to main content
Tagasi

EVS-EN ISO 16890-2:2022

Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resistance (ISO 16890-2:2022)

Üldinfo

Kehtiv alates 15.09.2022
Alusdokumendid
ISO 16890-2:2022; EN ISO 16890-2:2022
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
15.09.2022
Põhitekst
03.01.2017
Põhitekst
This document specifies the aerosol production, the test equipment and the test methods used for measuring fractional efficiency and air flow resistance of air filters for general ventilation.
It is intended to be used in conjunction with ISO 16890‑1, ISO 16890‑3 and ISO 16890‑4.
The test method described in this document is applicable for air flow rates between 0,25 m3/s (900 m3/h, 530 ft3/min) and 1,5 m3/s (5 400 m3/h, 3 178 ft3/min), referring to a test rig with a nominal face area of 610 mm × 610 mm (24.0 inches × 24.0 inches).
This document refers to particulate air filter elements for general ventilation having an ePM1 efficiency less than or equal to 99 % and an ePM10 efficiency greater than 20 % when tested as per the procedures defined within the ISO 16890 series.
NOTE      The lower limit for this test procedure is set at a minimum ePM10 efficiency of 20 % since it is very difficult for a test filter element below this level to meet the statistical validity requirements of this procedure.
This document is not applicable to filter elements used in portable room-air cleaners.

Nõutud väljad on tähistatud *

*
*
*
PDF
31,72 € koos KM-ga
Paber
31,72 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN ISO 16890-4:2022

Air filters for general ventilation - Part 4: Conditioning method to determine the minimum fractional test efficiency (ISO 16890-4:2022)
Uusim versioon Kehtiv alates 15.09.2022
Põhitekst

EVS-EN ISO 16276-1:2007

Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a dry film - Part 1: Pull-off testing
Uusim versioon Kehtiv alates 04.07.2007
Põhitekst

EVS-EN ISO 16276-2:2007

Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a dry film - Part 2: Cross-cut test and X-cut testing
Uusim versioon Kehtiv alates 04.07.2007
Põhitekst

EVS-EN ISO 16890-3:2016

Üldventilatsiooni õhufiltrid. Osa 3: Gravimeetrilise eralduse ja õhuvoolu takistuse määramine võrreldes kinnipüütud katsetolmu massiga
Kehtetu alates 16.09.2024