Skip to main content
Tagasi

EVS-EN ISO 1518-1:2019

Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method (ISO 1518-1:2019)

Üldinfo

Kehtetu alates 01.03.2023
Alusdokumendid
ISO 1518-1:2019; EN ISO 1518-1:2019
Tegevusala (ICS grupid)
87.040 Värvid ja lakid
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
01.03.2023
Põhitekst
16.07.2019
Põhitekst
05.07.2011
Põhitekst
EVS-EN ISO 1518-1:2011
This document specifies a test method for determining under defined conditions the resistance of a single coating or a multi-coat system of paint, varnish or related product to penetration by scratching with a scratch stylus loaded with a specified load. Penetration of the stylus is to the substrate, except in the case of a multi-coat system, in which case the stylus can penetrate either to the substrate or to an intermediate coat.
The method specified can be carried out
a) either as a "pass/fail" test, by testing with a single specified load applied to the stylus to assess conformity with a particular specification, or
b) as an assessment test by applying increasing loads to the stylus to determine the minimum load at which the coating is penetrated.
NOTE Neither this document nor ISO 1518‑2 specifies a method using a curved stylus, which is specified in ISO 12137. The choice between the three methods will depend on the particular practical problem.

Nõutud väljad on tähistatud *

*
*
*
PDF
12,20 € koos KM-ga
Paber
12,20 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Muudatus

EVS-EN 61000-2-2:2003/A2:2019

Electromagnetic compatibility (EMC) - Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
Uusim versioon Kehtiv alates 03.06.2019
Põhitekst

EVS-EN 61000-2-2:2003

Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
Uusim versioon Kehtiv alates 01.03.2003
Muudatus

EVS-EN 61000-2-2:2003/A1:2017

Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
Uusim versioon Kehtiv alates 01.11.2017
Põhitekst

EVS-EN ISO 6270-1:2018

Paints and varnishes - Determination of resistance to humidity - Part 1: Condensation (single-sided exposure) (ISO 6270-1:2017)
Uusim versioon Kehtiv alates 15.02.2018