Skip to main content
Tagasi

EVS-EN ISO 11114-2:2013

Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2013)

Üldinfo

Kehtetu alates 01.12.2021
Alusdokumendid
ISO 11114-2:2013; EN ISO 11114-2:2013
Tegevusala (ICS grupid)
23.020.35 Gaasiballoonid
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
01.12.2021
Põhitekst
06.05.2013
Põhitekst
Põhitekst
EVS-EN ISO 11114-2:2001
This part of ISO 11114 gives guidance in the selection and evaluation of compatibility between non-metallic materials for gas cylinders and valves and the gas contents. It also covers bundles, tubes and pressure drums. This part of ISO 11114 can be helpful for composite and laminated materials used for gas cylinders. It does not cover the subject completely and is intended to give guidance only in evaluating the compatibility of gas/material combinations. Only the influence of the gas in changing the material and mechanical properties is considered (for example chemical reaction or change in physical state). The basic properties of the materials, such as mechanical properties, required for design purposes are normally available from the materials supplier and are not considered in this part of ISO 11114. The compatibility data given are related to single component gases but can be used to some extent for gas mixtures. Ceramics, glasses, and adhesives are not covered by this part of ISO 11114. Other aspects such as quality of delivered gas are not considered. This part of ISO 11114 is not intended to be used for cryogenic fluids (see ISO 21010).

Nõutud väljad on tähistatud *

*
*
*
PDF
15,86 € koos KM-ga
Paber
15,86 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN ISO 11114-1:2012

Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:2012)
Kehtetu alates 01.07.2020
Põhitekst

EVS-EN ISO 11114-3:2011

Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere (ISO 11114-3:2010)
Uusim versioon Kehtiv alates 03.02.2011
Põhitekst

EVS-EN 1015-10:2005

Müürimörtide katsemeetodid. Osa 10: Kivistunud mördi kuiva näivtiheduse määramine
Kehtiv alates 01.01.2000
Muudatus

EVS-EN 1015-10:2005/A1:2007

Müürimörtide katsemeetodid. Osa 10: Kivistunud mördi kuiva näivtiheduse määramine
Kehtiv alates 06.02.2007