Skip to main content
Tagasi

EVS-EN ISO 10619-2:2018

Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2017)

Üldinfo

Kehtetu alates 03.08.2021
Alusdokumendid
ISO 10619-2:2017; EN ISO 10619-2:2018
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
03.08.2021
Põhitekst
15.02.2018
Põhitekst
04.01.2012
Põhitekst
EVS-EN ISO 10619-2:2011
ISO 10619-2:2017 specifies two methods for measuring the stiffness and one method for the determination of the flexibility of rubber and plastics hoses and tubing when they are bent to a specific radius at sub-ambient temperatures.
Method A is suitable for non-collapsible rubber and plastics hoses and tubing with a bore of up to and including 25 mm. This method provides a means of measuring the stiffness of the hose or tubing when the temperature is reduced from a standard laboratory temperature.
Method B is suitable for rubber and plastics hoses and tubing with a bore of up to 100 mm and provides a means of assessing the flexibility of the hose or tubing when bent around a mandrel at a specified sub-ambient temperature. It can also be used as a routine quality control test.
Method C is suitable for rubber and plastics hoses and tubing with a bore of 100 mm and greater. This method provides a means of measuring the stiffness of the hose and tubing at sub-ambient temperatures. This method is only suitable for hoses and tubing which are non-collapsible.

Nõutud väljad on tähistatud *

*
*
*
PDF
15,86 € koos KM-ga
Paber
15,86 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN ISO 10619-1:2018

Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2017)
Uusim versioon Kehtiv alates 16.03.2018
Muudatus

EVS-EN ISO 4671:2008/A1:2011

Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies - Amendment 1: Clarification of position at which outside diameter is measured (ISO 4671:2007/Amd 1:2011)
Kehtetu alates 18.04.2022
Põhitekst

EVS-EN ISO 8031:2009

Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity
Kehtetu alates 03.08.2020
Põhitekst

EVS-EN ISO 7233:2016

Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2016)
Kehtetu alates 01.06.2021