Skip to main content
Tagasi

EVS-EN ISO 10140-3:2010

Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation

Üldinfo

Kehtetu alates 17.05.2021
Alusdokumendid
ISO 10140-3:2010; EN ISO 10140-3:2010
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
17.05.2021
Põhitekst
02.07.2015
Muudatus
04.11.2010
Põhitekst
Põhitekst
EVS-EN 20140-10:1999
Põhitekst
EVS-EN ISO 140-3:1999
Põhitekst
EVS-EN ISO 140-1:1999
Põhitekst
EVS-EN ISO 140-8:1999
Põhitekst
EVS-EN ISO 140-6:1999
Muudatus
EVS-EN ISO 140-1:1999/A1:2005
Põhitekst
EVS-EN ISO 140-11:2005
Muudatus
EVS-EN ISO 140-3:1999/A1:2005
Põhitekst
EVS-EN ISO 140-16:2006
This part of ISO 10140 specifies laboratory methods for measuring the impact sound insulation of floor assemblies. The test results can be used to compare the sound insulation properties of building elements, classify elements according to their sound insulation capabilities, help design building products which require certain acoustic properties and estimate the in situ performance in complete buildings. The measurements are performed in laboratory test facilities in which sound transmission via flanking paths is suppressed. The results of measurements made in accordance with this part of ISO 10140 are not applicable directly to the field situation without accounting for other factors affecting sound insulation, such as flanking transmission, boundary conditions, and loss factor. A test method is specified that uses the standard tapping machine (see ISO 10140-5:2010, Annex E) to simulate impact sources like human footsteps when a person is wearing shoes. This part of ISO 10140 is applicable to all types of floors (whether heavyweight or lightweight) with all types of floor coverings. The test method applies only to laboratory measurements.

Nõutud väljad on tähistatud *

*
*
*
PDF
15,86 € koos KM-ga
Paber
15,86 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN ISO 10140-4:2010

Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements
Kehtetu alates 17.05.2021
Põhitekst

EVS-EN ISO 10140-5:2010

Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment
Kehtetu alates 17.05.2021
Põhitekst

EVS-EN ISO 10140-2:2010

Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation
Kehtetu alates 17.05.2021
Muudatus

EVS-EN ISO 10140-3:2010/A1:2015

Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation - Amendment 1 (ISO 10140-3:2010/Amd 1:2015)
Kehtetu alates 17.05.2021