Skip to main content
Tagasi

EVS-EN IEC 62477-2:2018

Safety requirements for power electronic converter systems and equipment - Part 2: Power electronic converters from 1 000 V AC or 1 500 V DC up to 36 kV AC or 54 kV DC

Üldinfo

Kehtiv alates 16.10.2018
Alusdokumendid
EN IEC 62477-2:2018; IEC 62477-2:2018
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
16.10.2018
Põhitekst
IEC 62477-2:2018 applies to power electronic converter systems (PECS) and equipment, their components for electronic power conversion and electronic power switching, including the means for their control, protection, monitoring and measurement, such as with the main purpose of converting electric power, with rated system voltages from 1 000 V AC or 1 500 V DC up to 36 kV AC or 54 kV DC. This document can also be used as a reference standard for product committees producing product standards for:
- adjustable speed electric power drive systems (PDS),
- standalone uninterruptible power systems (UPS), and,
-stabilized DC power supplies.
For PECS for which no product standard exists, this document provides minimum requirements for safety aspects.  This document has the status of a group safety publication in accordance with IEC Guide 104 for power electronic converter systems and equipment for solar, wind, tidal, wave, fuel cell or similar energy sources. According to IEC Guide 104, one of the responsibilities of technical committees is, wherever applicable, to make use of basic safety publications and/or group safety publications in the preparation of their product standards. This document
- establishes a common terminology for safety aspects relating to PECS and equipment,
- establishes minimum requirements for the coordination of safety aspects of interrelated parts within a PECS,
- establishes a common basis for minimum safety requirements for the PEC portion of products that contain PEC,
- specifies requirements to reduce risks of fire, electric shock, thermal, energy and mechanical hazards, during use and operation and, where specifically stated, during service and maintenance,
- specifies minimum requirements to reduce risks with respect to pluggable and permanently connected equipment, whether it consists of a system of interconnected units or independent units, subject to installing, operating and maintaining the equipment in the manner prescribed by the manufacturer,
- establishes an arc fault rating label requirement with testing instructions for PEC and PECS, and
- covers power electronic converters and systems in open type design, which are catalog (pre-defined commercially available) power electronic converters and systems or engineered solutions from same.
This document does not cover  
- telecommunications apparatus other than power supplies to such apparatus,
- functional safety aspects as covered by, for example, IEC 61508 (all parts),
- electrical equipment and systems for railways applications and electric vehicles, and
- power electronic converters and systems in open type design, which are – in their major part – dimensioned, designed and constructed according to the user’s individual requirements and specifications and follow power installation standards, for example IEC 61936-1.

Nõutud väljad on tähistatud *

*
*
*
PDF
39,04 € koos KM-ga
Paber
39,04 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN 62477-1:2012

Jõupooljuht-muundussüsteemide ja -muundusseadmete ohutusnõuded. Osa 1: Üldnõuded
Kehtetu alates 01.11.2023
Põhitekst

EVS-EN 62501:2009

Voltage sourced converter (VSC) valves for high-voltage direct curent (HVDC) power transmission - Electrical testing
Kehtetu alates 03.06.2024
Põhitekst

EVS-EN IEC 62793:2020

Thunderstorm warning systems - Protection against lightning
Uusim versioon Kehtiv alates 16.11.2020
Põhitekst

EVS-EN ISO 7547:2005

Ships and marine technology - Air-conditioning and ventilatiion of accommodation spaces - Design conditions and basis of calculations
Uusim versioon Kehtiv alates 07.03.2005