Skip to main content
Tagasi

EVS-EN IEC 60900:2018

Live working - Hand tools for use up to 1 000 V AC and 1 500 V DC

Üldinfo

Kehtiv alates 04.09.2018
Alusdokumendid
IEC 60900:2018; EN IEC 60900:2018
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
15.06.2020
Parandus
04.09.2018
Põhitekst
03.10.2012
Põhitekst
IEC 60900:2018 is applicable to insulated, insulating and hybrid hand tools used for working live or close to live parts at nominal voltages up to 1 000 V AC and 1 500 V DC. The products designed and manufactured according to this document contribute to the safety of the users provided they are used by skilled persons, in accordance with safe methods of work and the instructions for use (where appropriate). This document has been prepared in accordance with the requirements of IEC 61477 where applicable. The products covered by this document may have an impact on the environment during some or all stages of its life cycle. These impacts can range from slight to significant, be of short term or long-term duration, and occur at the global, regional or local level. This document does not include requirements and test provisions for the manufacturers of the products, or recommendations to the users of the products for environmental improvement. This fourth edition cancels and replaces the third edition, published in 2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) addition of a third category of tools has been added, namely hybrid hand tools;
b) introduction of a new informative Annex A on examples of insulated, insulating and hybrid hand tools.

Nõutud väljad on tähistatud *

*
*
*
PDF
31,72 € koos KM-ga
Paber
31,72 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN 60068-2-2:2007

Environmental testing -- Part 2-2: Tests - Test B: Dry heat
Uusim versioon Kehtiv alates 05.12.2007
Põhitekst

EVS-EN 12413:2019

Safety requirements for bonded abrasive products
Uusim versioon Kehtiv alates 01.11.2019
Põhitekst + parandus

EVS-EN 61439-3:2012

Madalpingelised aparaadikoosted. Osa 3: Jaotuskilbid, mida tohivad käsitada tavaisikud
Uusim versioon Kehtiv alates 05.12.2012
Põhitekst

EVS-EN 1912:2024

Structural Timber - Strength classes - Assignment of visual grades and species
Uusim versioon Kehtiv alates 03.06.2024