Skip to main content
Tagasi

EVS-EN IEC 60669-2-1:2022

Kohtkindlate majapidamis- ja muude taoliste elektripaigaldiste lülitid. Osa 2-1: Erinõuded. Elektronlülitid

Üldinfo

Kehtiv alates 03.10.2022
Alusdokumendid
IEC 60669-2-1:2021; EN IEC 60669-2-1:2022
Tegevusala (ICS grupid)
29.120.40 Lülitid
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
17.01.2024
Parandus
03.10.2022
Põhitekst
03.10.2022
Põhitekst + muudatus
04.10.2016
Põhitekst
03.02.2011
Muudatus
07.08.2009
Muudatus
03.04.2009
Parandus
03.04.2009
Muudatus
05.12.2007
Muudatus
10.08.2005
Põhitekst
10.12.2004
Põhitekst
This Clause of Part 1 is completely replaced by:
This Part of IEC 60669 applies to electronic control devices which is used as a general term to cover electronic switches, HBES/BACS switches and electronic extension units.
It applies to electronic switches and to HBES/BACS switches, for alternating current (AC) only with a rated switching voltage not exceeding 250 V and a rated current not exceeding 16 A, intended for household and similar fixed electrical installations, either indoors or outdoors.
It also applies to electronic extension units with a rated supply voltage not exceeding 250 V AC and 120 V DC, such as sensors and push buttons controlling the electronic switches, or the HBES/BACS switches or similar control devices used in lighting systems in the building environment.
NOTE 1 An example of lighting systems is DALI.
This Part of IEC 60669 also applies to electronic RCS and electronic TDS. Particular requirements are given in Annex FF.
Switches including only passive components such as resistors, capacitors, inductors, PTC and NTC components, varistors, printed wiring boards and connectors are not considered as electronic control devices.
This Part of IEC 60669 also applies to electronic switches and HBES/BACS switches for the operation of lighting equipment circuits and the control of the brightness of lighting equipment (dimmers) as well as the control of the speed of motors (for example, those used in ventilating fans) and for other purposes (for example, heating controls).
The operation and/or control as mentioned above may be transmitted by an electronic signal via several media, e.g. powerline (mains), twisted pair, optical fibre, radio frequency, infra-red, etc. and are performed:
- intentionally by a person via an actuating member, a key, a card, etc., via a sensing surface or a sensing unit, by means of touch, proximity, turn, optical, acoustic, thermal;
- by physical means, e.g. light, temperature, humidity, time, wind velocity, presence of people;
- by any other influence.

Nõutud väljad on tähistatud *

*
*
*
PDF
39,04 € koos KM-ga
Paber
39,04 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring