Skip to main content
Tagasi

EVS-EN 60076-3:2013

Power transformers -- Part 3: Insulation levels, dielectric tests and external clearances in air

Üldinfo

Kehtiv alates 06.01.2014
Alusdokumendid
IEC 60076-3:2013; EN 60076-3:2013
Tegevusala (ICS grupid)
29.180 Trafod. Reaktorid
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
04.06.2018
Muudatus
06.01.2014
Põhitekst
01.01.2003
Põhitekst
IEC 60076-3:2013 specifies the insulation requirements and the corresponding insulation tests with reference to specific windings and their terminals. This International Standard applies to power transformers as defined by IEC 60076-1. It also recommends external clearances in air. It gives details of the applicable dielectric tests and minimum dielectric test levels. Recommended minimum external clearances in air between live parts and between live parts and earth are given for use when these clearances are not specified by the purchaser. For categories of power transformers and reactors which have their own IEC standards, this standard is applicable only to the extent in which it is specifically called up by cross reference in the other standards. This third edition of IEC 60076-3 cancels and replaces the second edition published in 2000, and constitutes a technical revision. The main changes from the previous edition are as follows:
- Three categories of transformer are clearly identified together with the relevant test requirements, these are summarised in Table 1.
  - Switching impulse levels are defined for values of Um 72,5 kV.
- The procedure for Induced voltage tests with PD has been revised to ensure adequate phase to phase test voltages.
  - The AC withstand test has been redefined (LTAC instead of ACSD).
- Induced voltage tests are now based on Ur  rather than Um. - New requirements for impulse waveshape (k factor) have been introduced.
- Tables of test levels have been merged and aligned with IEC 60071-1:2010.
- Additional test levels have been introduced for Um 800 kV.
  - A new Annex E has been introduced, which sets out the principles used in assigning the tests, test levels and clearances in air.

Nõutud väljad on tähistatud *

*
*
*
PDF
31,72 € koos KM-ga
Paber
31,72 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Muudatus

EVS-EN 60076-3:2013/A1:2018

Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air
Uusim versioon Kehtiv alates 04.06.2018
Põhitekst

EVS-EN 60076-1:2012

Jõutrafod. Osa 1: Üldist
Uusim versioon Kehtiv alates 05.03.2012
Põhitekst

EVS-EN 60076-5:2006

Power transformers Part 5: Ability to withstand short-circuit
Uusim versioon Kehtiv alates 06.10.2006
Põhitekst

EVS-EN 60076-2:2011

Power transformers - Part 2: Temperature rise for liquid-immersed transformers
Uusim versioon Kehtiv alates 04.05.2011