Skip to main content
Tagasi

EVS-EN 50121-2:2017

Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world

Üldinfo

Kehtiv alates 03.02.2017
Alusdokumendid
EN 50121-2:2017
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
03.02.2017
Põhitekst
07.05.2015
Põhitekst
This European Standard is intended to define the electromagnetic environment of the whole railway system including urban mass transit and light rail system. It describes the measurement method to verify the emissions, and gives the cartography values of the fields most frequently encountered.
This European Standard specifies the emission limits of the whole railway system to the outside world.
The emission parameters refer to the particular measuring points defined in Clause 5. These emissions should be assumed to exist at all points in the vertical planes which are 10 m from the centre lines of the outer electrified railway tracks, or 10 m from the fence of the substations.
Also, the zones above and below the railway system may be affected by electromagnetic emissions and particular cases need to be considered individually.
These specific provisions need to be used in conjunction with the general provisions in EN 50121-1.
For existing railway lines, it is assumed that compliance with the emission requirements of EN 50121-3-1, EN 50121-3-2, EN 50121-4 and EN 50121 5 will ensure the compliance with the emission values given in this part.
For newly build railway systems it is best practice to provide compliance to the emission limits given in this part of the standard (as defined in the EMC plan according to EN 50121-1).

Nõutud väljad on tähistatud *

*
*
*
PDF
19,52 € koos KM-ga
Paber
19,52 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN 50121-1:2017

Railway applications - Electromagnetic compatibility - Part 1: General
Uusim versioon Kehtiv alates 03.02.2017
Põhitekst

EVS-EN 50121-3-1:2017

Raudteealased rakendused. Elektromagnetiline ühilduvus. Osa 3-1: Veerem. Rong ja komplektveerem
Uusim versioon Kehtiv alates 03.02.2017
Põhitekst + muudatus

EVS-EN 50121-3-2:2016+A1:2019

Raudteealased rakendused. Elektromagnetiline ühilduvus. Osa 3-2: Veerem. Aparatuur
Uusim versioon Kehtiv alates 03.02.2020
Põhitekst

EVS-EN 50121-5:2017

Raudteealased rakendused. Elektromagnetiline ühilduvus. Osa 5: Elektrivarustussüsteemi püsipaigaldiste ja aparatuuri emissioon ja häiringutaluvus
Uusim versioon Kehtiv alates 04.04.2017