Skip to main content
Tagasi

EVS-EN 16500:2014

Jäätmematerjalide või taaskasutatavate osiste tihendamise masinad. Püstised pallimispressid. Ohutusnõuded

Üldinfo

Kehtiv alates 03.09.2014
Alusdokumendid
EN 16500:2014
Direktiivid või määrused
2006/42/EC Masinad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
03.09.2014
Põhitekst
This European Standard specifies the safety requirements for the design, manufacture and information for safe use of vertical baling presses for compacting waste material or recyclable fractions (e. g. paper, plastics, textiles, cans, cardboard, mixed waste), hereafter referred to as materials.
This standard covers vertical baling presses:
-  that are manually or mechanically fed; and
-  with fixed enclosed baling chambers (single or multiple chamber presses); and
-  with a mechanically, hydraulically or pneumatically operated compacting equipment; and
-  where the compacted bale is tied manually in the baling chamber; and
-  with manual unloading or mechanical ejection of the compacted bale.
The scope of this standard includes any mechanical feed equipment, such as belt type conveyors or bin lifts, forming an integral part of the baling press assembly. It also includes integral material flow control equipment.
This standard does not apply to:
-  vertical baling presses without fixed enclosed baling chamber(s); or
-  round balers or roll baling machines; or
-  machines where the compressed material is bagged; or
-  pneumatic conveying systems; or
-  equipment for transporting the balers; or
-  local exhaust ventilation for the removal of dusts or vapours; or
-  hazards arising from any integral pre-conditioning equipment; or
-  hazards arising from the materials being processed (e.g. asbestos, clinical waste, flammable or explosive materials, unhealthy or poisonous waste).
This standard does not apply to cranes, lift trucks or other mobile plant used to load materials into the feed opening. Nor does it apply to hazards arising from loading materials into the feed opening using cranes, lift trucks or other mobile plant.
This standard does not include requirements to meet the specifications of the ATEX Directive 94/9/EC.
All hazards mentioned in Clause 4 are dealt with in this European Standard.
This European Standard is not applicable for vertical baling presses which are manufactured before the date of its publication as an EN.

Nõutud väljad on tähistatud *

*
*
*
PDF
26,84 € koos KM-ga
Paber
26,84 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN 16252:2012

Jäätmematerjalide või taaskasutatavate osiste tihendamise masinad. Horisontaalsed pallimispressid. Ohutusnõuded
Uusim versioon Kehtiv alates 04.01.2013
Põhitekst + muudatus

EVS-EN 16486:2014+A1:2020

Jäätmematerjalide või taaskasutatavate osiste tihendamise masinad. Tihendajad. Ohutusnõuded
Uusim versioon Kehtiv alates 01.09.2020
Põhitekst

EVS-EN 61032:2002

Protection of persons and equipment by enclosures - Probes for verification
Uusim versioon Kehtiv alates 01.01.2003
Põhitekst

EVS-EN 61508-1:2010

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements
Uusim versioon Kehtiv alates 06.09.2010