EVS-EN 15313:2024

To ensure safety and interoperability, this document gives:
-  the limits for in-service and off-vehicle wheelsets;
-  the operations to be carried out for which the specific values (and/or criteria) remain to be defined in the maintenance plan.
This document applies to wheelsets and axleboxes complying with the following European standards:
-  EN 13103-1:2017+A1:2022;
-  EN 13260:2020, EN 13261:2020, EN 13262:2020;
-  EN 13979-1:2023;
-  EN 13715:2020;
-  EN 13749:2021+A1:2023;
that comprise:
-  the axle fitted with wheels of diameters greater than or equal to 330 mm;
-  axleboxes with bearings and grease.
This document is also applicable to wheelsets:
-  fitted with brake discs, final drive, transmission or noise-damping systems, as appropriate;
-  not complying with the above European standards, but complying with the international requirements in force, for example in UIC leaflets, before the approval of these standards;
-  with tyred wheels;
-  with resilient wheels.
For equipment not covered by Directive (EU) 2016/797, this European Standard can be applied, noting that different values can be used.
All dimensions in this document are in millimetres (mm).
It is necessary to describe in a specific document the tasks to be performed in order to maintain wheelsets within the limits defined therein.
NOTE  The specific values and criteria are defined in an appropriate maintenance plan.