Skip to main content
Tagasi

EVS-EN 14886:2008

Kummi- ja plastitöötlusmasinad. Lintnoad vahtplastitahvlite lõikamiseks. Ohutusnõuded

Üldinfo

Kehtiv alates 08.05.2008
Alusdokumendid
EN 14886:2008
Direktiivid või määrused
2006/42/EC Masinad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
08.05.2008
Põhitekst
This European standard applies to machines that are designed specifically to cut, split or peel block foams to commercially required shapes, using a single or double cut.  All hazards listed in clause 4 are covered by this document. Cutting of block foams may be by:  vertical cutting;  horizontal cutting;  inclined cutting; transverse cutting;  contour cutting; or a combination of the above. The material to be cut may be supported or transported by:  a fixed table; a shuttle table; a conveyor; a turntable; rollers; mandrel; or  a combination of the above.  Cutting can be either manual or automatic. Cutting tools can be:  smooth-edged or toothed bandknives;  cutting wires. Movement of the cutting tool can be either oscillating or continuous in one direction. This European Standard does not apply to:  laser and water jet cutting; hot wire cutting;  wood, metal and food cutting machines. The safety requirements for the additional hazards arising from the interaction between bandknife cutting machines and ancillary equipment, especially loading and unloading devices, are specified. The safety requirements for the ancillary equipment itself are not specified. This European Standard covers machines used for cutting plastics and rubber having a cellular or compact structure. However, it may also be applied when these machines are used for cutting other materials, for example textiles, fibres and mineral wool, if cutting these materials does not create additional hazards. This document is not applicable to bandknife cutting machines manufactured before the date of its publication as an EN.

Nõutud väljad on tähistatud *

*
*
*
PDF
39,04 € koos KM-ga
Paber
39,04 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN 12013:2018

Kummi- ja plastitöötlusmasinad. Valtskambersegistid. Ohutusnõuded
Uusim versioon Kehtiv alates 01.02.2018
Põhitekst

EVS-EN ISO 14122-1:2016

Masinate ohutus. Püsijuurdepääsuvahendid masinatele. Osa 1: Kinnitatud vahendite valimine ja juurdepääsu üldnõuded
Uusim versioon Kehtiv alates 05.07.2016
Põhitekst

EVS-EN ISO 14122-2:2016

Masinate ohutus. Püsijuurdepääsuvahendid masinatele. Osa 2: Tööplatvormid ja käiguteed
Uusim versioon Kehtiv alates 05.07.2016
Põhitekst

EVS-EN ISO 14122-3:2016

Masinate ohutus. Püsijuurdepääsuvahendid masinatele. Osa 3: Trepid, treppredelid ja kaitsepiirded
Uusim versioon Kehtiv alates 05.07.2016