Skip to main content
Tagasi

EVS-EN 10132:2021

Cold rolled narrow steel strip for heat treatment - Technical delivery conditions

Üldinfo

Kehtiv alates 01.10.2021
Alusdokumendid
EN 10132:2021
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
01.10.2021
Põhitekst
01.09.2000
Põhitekst
01.09.2000
Põhitekst
01.09.2000
Põhitekst
01.09.2000
Põhitekst
This document specifies the technical delivery conditions for cold rolled narrow steel strip made of non alloy and alloy steel grades in the form of coils and cut lengths in rolling widths less than 600 mm. Cold rolled narrow steel strip is available in grades of case hardening steel and of steels for quenching and tempering for general and special applications particularily springs.
- Case hardening steels in thicknesses up to and including 10 mm;
- steels for quenching and tempering in thicknesses up to and including 6 mm in the conditions annealed (+A), annealed and skin passed (+LC) or cold rolled (+CR);
- steels in the quenched and tempered condition (+QT) in thicknesses between 0,30 mm and 3,00 mm.
In special cases supplementary requirements or deviations with respect to this document can be agreed between the purchaser and the supplier at the time of enquiry and order (see 5.2 and Annex A).
In addition to the requirements of this document, the general technical delivery requirements specified in EN 10021 apply.
This document does not cover cold rolled flat products for which separate standards exist, e.g.:
- cold rolled uncoated low carbon steel narrow strip for cold forming (EN 10139);
- cold rolled steel flat products with higher yield strength for cold forming (EN 10268).

Nõutud väljad on tähistatud *

*
*
*
PDF
19,52 € koos KM-ga
Paber
19,52 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN 14195:2015

Kipsplaatkonstruktsioonide metallprofiilid. Määratlused, nõuded ja katsemeetodid
Uusim versioon Kehtiv alates 04.02.2015
Põhitekst

EVS-EN ISO 683-2:2018

Heat-treatable steels, alloy steels and free-cutting steels - Part 2: Alloy steels for quenching and tempering (ISO 683-2:2016)
Uusim versioon Kehtiv alates 04.07.2018
Põhitekst

EVS-EN ISO 683-1:2018

Heat-treatable steels, alloy steels and free-cutting steels - Part 1: Non-alloy steels for quenching and tempering (ISO 683-1:2016)
Uusim versioon Kehtiv alates 04.07.2018
Põhitekst

EVS-EN ISO 683-3:2022

Heat-treatable steels, alloy steels and free-cutting steels - Part 3: Case-hardening steels (ISO 683-3:2022)
Uusim versioon Kehtiv alates 01.03.2022