Back

EVS-EN IEC 60379:2023

Methods for measuring the performance of electric storage water heaters for household purposes

General information

Valid from 03.04.2023
Base Documents
IEC 60379:2023; EN IEC 60379:2023
ICS Groups
91.140.65 Water heating equipment
Directives or regulations
None

Standard history

Status
Date
Type
Name
03.04.2023
Main
EVS-EN IEC 60379:2023
09.07.2004
Main
EVS-EN 60379:2004
This Standard specifies methods for measuring the performance of electric storage water heaters to produce domestic potable or non-potable hot water for household and similar use.
The object is to state and define the principal performance characteristics of electric storage water heaters and to describe the test methods for measuring these characteristics.
NOTE 1 This standard does not apply to;
- storage water heaters that use electricity as a secondary source of heating the water;
- storage water heaters that do not use a tank to storage hot water;
- electric storage water heaters that do not meet the minimum (or maximum) output performance of the smallest (or biggest) load profile, as defined in Table 4.
- water-heaters without thermal insulation
NOTE 2 This standard does not specify safety requirements. For safety requirements see IEC 60335-1 in conjunction with IEC 60335-2-21.

Required fields are indicated with *

*
*
*
PDF
26.84 € incl tax
Paper
26.84 € incl tax
Browse standard from 2.44 € incl tax
Standard monitoring
English (PDF 748 KB)

Related products

Main

EVS 844:2016

Design of heating for buildings
Withdrawn from 18.04.2022
Main

EVS 844:2022

Design of heating for buildings
Newest version Valid from 18.04.2022
Main + amendment

EVS-EN 60335-2-21:2021+A1:2021

Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters (IEC 60335-2-21:2012, modified + COR1:2013 + IEC 60335-2-21:2012/A1:2018)
Newest version Valid from 17.01.2022
Main

EVS-EN 12831-3:2017

Energy performance of buildings - Method for calculation of the design heat load - Part 3: Domestic hot water systems heat load and characterisation of needs, Module M8-2, M8-3
Newest version Valid from 02.08.2017

Customers who bought this item also bought

Main

EVS-EN 12977-3:2018

Thermal solar systems and components - Custom built systems - Part 3: Performance test methods for solar water heater stores
Newest version Valid from 16.04.2018
Main + amendment

EVS-EN 12897:2016+A1:2020

Water supply - Specification for indirectly heated unvented (closed) storage water heaters
Newest version Valid from 17.02.2020
Amendment

EVS-EN 50440:2015/A1:2020

Efficiency of domestic electrical storage water heaters and testing methods
Newest version Valid from 01.09.2020
Main

EVS-EN ISO 16147:2021

Small craft - Inboard diesel engines - Engine-mounted fuel, oil and electrical components (ISO 16147:2020)
Newest version Valid from 15.02.2021

Standards designation

EVS Estonian standard
EN European standard (published by an CEN or CENELEC)
EN ISO International standard adopted as an European standard
ISO International Organization for Standardization’s standard
IEC International Electrotechnical Commission’s standard
HD CENELEC’s harmonisation document
   
EVS-EN European standard implemented in Estonia
EVS-EN ISO International standard adopted in Europe and implemented in Estonia
EVS-EN ISO/IEC International standard/International electrotechnical standard adopted in Europe and implemented in Estonia
EVS-IEC International electrotechnical standard implemented in Estonia
EVS-ISO International standard implemented in Estonia
   
A, AMD amedment
+A a full standard plus the amendment
/A only amendment
COR, AC corrigendum
+COR a full standard plus the corrigendum
NA national annex
+NA a full standard plus the national annex
/NA only national annex
TS technical specification
TR technical report
CWA agreement, developed by a CEN or CENELEC
prEVS-EN (etc) draft standard
   
et the standard is in Estonian only
en the standard is in English only
et-en the standard is in Parallel text Estonian-English