These specifications are for the elaboration of FPC according to the instructions in Table ZA.3 in EN 998-2/ Annex ZA, which refer to Clause 8.3 - Factory Production Control.
Manufacturers having a factory production control system which complies with EN ISO 9001:2000 and
which addresses the requirements of the harmonised standard EN 998-2, are recognised as satisfying the FPC requirements of the Directive.
The manufacturer shall establish, document and maintain a factory production control system to enable continuing conformity with the standard and the declared values of the products placed on the market.
The responsibility, authority and interrelation of all personnel who manage, perform and verify work
affecting the quality of designed masonry mortar products shall be defined in the documentation of the factory production control system and keep effective.
The factory production control system shall describe the procedure of production, the regular inspections by the manufacturer and the testing. Controls and tests should address the characteristics of raw materials and finished products, as well as the production procedures, the production
equipment or machines, the test equipment and the marking of the product.
All the test results shall be recorded.
Actions to be taken when the control test values or criteria do not meet those specified shall be documented by the manufacturer.
The conformity of the product shall be determined by testing according to the requirements of the harmonized standard EN 998-2 and correlated to the values and parameters stated in the factory
production control manual.
Required fields are indicated with *
