Skip to main content
Back

ISO 26262-2:2011

Road vehicles -- Functional safety -- Part 2: Management of functional safety

General information

Withdrawn from 17.12.2018
Directives or regulations
None

Standard history

Status
Date
Type
Name
17.12.2018
Main
ISO 26262 is intended to be applied to safety-related systems that include one or more electrical and/or electronic (E/E) systems and that are installed in series production passenger cars with a maximum gross vehicle mass up to 3 500 kg. ISO 26262 does not address unique E/E systems in special purpose vehicles such as vehicles designed for drivers with disabilities.
Systems and their components released for production, or systems and their components already under development prior to the publication date of ISO 26262, are exempted from the scope. For further development or alterations based on systems and their components released for production prior to the publication of ISO 26262, only the modifications will be developed in accordance with ISO 26262.
ISO 26262 addresses possible hazards caused by malfunctioning behaviour of E/E safety-related systems, including interaction of these systems. It does not address hazards related to electric shock, fire, smoke, heat, radiation, toxicity, flammability, reactivity, corrosion, release of energy and similar hazards, unless directly caused by malfunctioning behaviour of E/E safety-related systems.
ISO 26262 does not address the nominal performance of E/E systems, even if dedicated functional performance standards exist for these systems (e.g. active and passive safety systems, brake systems, Adaptive Cruise Control).
ISO 26262-2:2011 specifies the requirements for functional safety management for automotive applications, including the following:

       project-independent requirements with regard to the organizations involved (overall safety management), and
       project-specific requirements with regard to the management activities in the safety lifecycle (i.e. management during the concept phase and product development, and after the release for production).

Required fields are indicated with *

*
*
*
PDF
82.61 € incl tax
Paper
82.61 € incl tax
Standard monitoring

Customers who bought this item also bought

Main

EVS-EN 61557-15:2014

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
Newest version Valid from 05.06.2014
Main

EVS-EN 60945:2003

Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results
Newest version Valid from 01.03.2003
Main

EVS-EN 61508-1:2010

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements
Newest version Valid from 06.09.2010
Main

EVS-EN 61508-2:2010

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronicsafety-related systems
Newest version Valid from 06.09.2010