Skip to main content
Back

IEC TR 60909-2:2008

Short-circuit currents in three-phase a.c. systems - Part 2: Data of electrical equipment for short-circuit current calculations

General information

Valid from 13.11.2008
Directives or regulations
None

Standard history

Status
Date
Type
Name
13.11.2008
Main
IEC 60909-2:2008(E) comprises data of electrical equipment collected from different countries to be used when necessary for the calculation of short-circuit currents in accordance with IEC 60909-0. It may be applied for calculating short-circuit currents in low-voltage networks if they are in accordance with typical equipment employed in the user's country. The collected data and their evaluation may be used for medium- or high-voltage planning purposes and also for comparison with data given by manufacturers or electricity suppliers. For overhead lines and cables the electrical data may in some cases also be calculated from the physical dimensions and the material following the equations given in this report. This second edition cancels and replaces the first edition published in 1992 and constitutes a technical revision. The significant technical changes with respect to the previous edition are as follows:
- Subclause 2.5 gives equations and examples for the calculation of the positive-, the negative- and the zero-sequence impedances and reduction factors for high-, medium and low-voltage cables with sheaths and shields earthed at both ends.
- Subclause 2.7 gives equations and figures for the calculation of the positive-sequence impedances of busbar configurations.

Required fields are indicated with *

*
*
*
PDF
354.01 € incl tax
Paper
354.01 € incl tax
Standard monitoring

Customers who bought this item also bought

Main

EVS-EN 60909-3:2010

Short-circuit currents in three-phase a.c systems -- Part 3: Currents during two separate simultaneous line-to-earth short-circuits and partial short-circuit currents flowing through earth
Newest version Valid from 06.05.2010
Main

EVS-EN 60909-0:2016

Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents
Newest version Valid from 05.07.2016
Main

IEC TR 60909-1:2002

Short-circuit currents in three-phase a.c. systems - Part 1: Factors for the calculation of short-circuit currents according to IEC 60909-0
Newest version Valid from 31.07.2002
Main

EVS-EN 60865-1:2012

Short-circuit currents - Calculation of effects - Part 1: Definitions and calculation methods
Newest version Valid from 03.05.2012