Back

EVS-EN ISO 21028-2:2018

Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C (ISO 21028-2:2018)

General information

Valid from 03.05.2018
Base Documents
ISO 21028-2:2018; EN ISO 21028-2:2018
ICS Groups
23.020.40 Cryogenic vessels
Directives or regulations
2014/68/EU Pressure equipment (PED)

Standard history

Status
Date
Type
Name
03.05.2018
Main
EVS-EN ISO 21028-2:2018
10.08.2005
Main
EVS-EN 1252-2:2005
ISO 21028-2:2018 specifies the toughness requirements of metallic materials for use at temperatures between −20 °C and −80 °C to ensure their suitability for cryogenic vessels. This document is applicable to fine-grain and low-alloyed steels with specified yield strength ≤460 N/mm2, aluminium and aluminium alloys, copper and copper alloys and austenitic stainless steels.
NOTE For steel materials listed in EN 13445-2 or EN 13480-2 or for steel materials and weldings complying with the same fundamental safety requirements, the requirements for prevention of brittle fracture at low temperatures according to EN 13445-2:2014, Annex B, method 2, or EN 13480-2:2012, Annex B, method 2 can be applied.

Required fields are indicated with *

*
*
*
PDF
24.40 € incl tax
Paper
24.40 € incl tax
Browse standard from 2.44 € incl tax
Standard monitoring
English (PDF 410 KB)

Related products

Main

EVS-EN 13530-2:2003

Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing
Newest version Valid from 01.03.2003
Main

EVS-EN ISO 23208:2019

Cryogenic vessels - Cleanliness for cryogenic service (ISO 23208:2017)
Newest version Valid from 15.04.2019
Main

EVS-EN ISO 21013-3:2016

Cryogenic vessels - Pressure-relief accessories for cryogenic service - Part 3: Sizing and capacity determination (ISO 21013-3:2016)
Newest version Valid from 05.07.2016
Main

EVS-EN ISO 21029-2:2015

Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume - Part 2: Operational requirements (ISO 21029-2:2015)
Newest version Valid from 06.10.2015

Customers who bought this item also bought

Main

EVS-EN ISO 21028-1:2016

Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016)
Newest version Valid from 01.11.2016
Main

EVS-EN 14197-1:2003

Cryogenic vessels - Static non-vacuum insulated vessels - Part 1: Fundamental requirements
Newest version Valid from 06.10.2003
Main + corrigendum

EVS-EN 14197-2:2004

Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing
Newest version Valid from 10.03.2004
Main

EVS-EN 14197-3:2004

Cryogenic vessels - Static non-vacuum insulated vessels - Part 3: Operational requirements
Newest version Valid from 09.08.2004

Standards designation

EVS Estonian standard
EN European standard (published by an CEN or CENELEC)
EN ISO International standard adopted as an European standard
ISO International Organization for Standardization’s standard
IEC International Electrotechnical Commission’s standard
HD CENELEC’s harmonisation document
   
EVS-EN European standard implemented in Estonia
EVS-EN ISO International standard adopted in Europe and implemented in Estonia
EVS-EN ISO/IEC International standard/International electrotechnical standard adopted in Europe and implemented in Estonia
EVS-IEC International electrotechnical standard implemented in Estonia
EVS-ISO International standard implemented in Estonia
   
A, AMD amedment
+A a full standard plus the amendment
/A only amendment
COR, AC corrigendum
+COR a full standard plus the corrigendum
NA national annex
+NA a full standard plus the national annex
/NA only national annex
TS technical specification
TR technical report
CWA agreement, developed by a CEN or CENELEC
prEVS-EN (etc) draft standard
   
et the standard is in Estonian only
en the standard is in English only
et-en the standard is in Parallel text Estonian-English