Skip to main content
Back

EVS-EN ISO 20884:2019

Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 20884:2019)

General information

Valid from 15.10.2019
Base Documents
ISO 20884:2019; EN ISO 20884:2019
Directives or regulations
None

Standard history

Status
Date
Type
Name
01.11.2021
Amendment
15.10.2019
Main
02.06.2011
Main
This document specifies a wavelength-dispersive X-ray fluorescence (WDXRF) test method for the determination of the sulfur content of liquid, homogeneous automotive fuels from 5 mg/kg to 500 mg/kg, which have a maximum oxygen content of 3,7 % (m/m). This product range covers:
— diesel fuels containing up to about 30 % (V/V) fatty acid methyl esters (FAME),
— motor gasolines containing up to about 10 % (V/V) ethanol,
— synthetic fuels such as hydrotreated vegetable oil (HVO) and gas to liquid (GTL) having sulfur contents in the range of 5 mg/kg to 45 mg/kg.
Products with higher oxygen content show significant matrix effects, e.g. pure FAME used as biodiesel, nevertheless, pure FAME can be analysed when the corresponding procedures are followed (see 5.3 and 8.1).
Other products can be analysed with this test method, though precision data for products other than those mentioned have not been established for this document.
NOTE 1 Sulfur contents higher than 500 mg/kg can be determined after sample dilution, however, the precision was not established for diluted samples.
NOTE 2 For the purposes of this document, "% (m/m)" and "% (V/V)" are used to represent the mass fraction, w, and the volume fraction, φ, of a material respectively.

Required fields are indicated with *

*
*
*
PDF
15.86 € incl tax
Paper
15.86 € incl tax
Browse standard from 2.44 € incl tax
Standard monitoring

Customers who bought this item also bought

Main

EVS-EN ISO 20846:2019

Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2019)
Newest version Valid from 15.10.2019
Main

EVS-EN ISO 5165:2020

Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method (ISO 5165:2020)
Newest version Valid from 17.08.2020
Main

EVS-EN ISO 3104:2020

Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:2020)
Withdrawn from 01.12.2023
Main

EVS-EN 13016-1:2018

Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
Withdrawn from 01.07.2024