Skip to main content
Back

EVS-EN ISO 16911-1:2013

Stationary source emissions - Determination of velocity and volume flow rate in ducts - Part 1: Manual reference method (ISO 16911-1:2013)

General information

Valid from 02.04.2013
Base Documents
ISO 16911-1:2013; EN ISO 16911-1:2013
Directives or regulations
None

Standard history

Status
Date
Type
Name
02.04.2013
Main
EN ISO 16911-1 specifies a method for periodic determination of the axial velocity and volume flow rate of gas within emissions ducts and stacks. It is applicable for use in circular or rectangular ducts with measurement locations meeting the requirements of EN 15259. Minimum and maximum duct sizes are driven by practical considerations of the measurement devices described within EN ISO 16911-1. EN ISO 16911-1 requires all flow measurements to have demonstrable metrological traceability to national or international primary standards. To be used as a standard reference method, the user is required to demonstrate that the performance characteristics of the method are equal to or better than the performance criteria defined in EN ISO 16911-1 and that the overall uncertainty of the method, expressed with a level of confidence of 95 %, is determined and reported. The results for each method defined in EN ISO 16911-1 have different uncertainties within a range of 1 % to 10 % at flow velocities of 20 m/s. Methods further to these can be used provided that the user can demonstrate equivalence, based on the principles of CEN/TS 14793.[1]

Required fields are indicated with *

*
*
*
PDF
39.04 € incl tax
Paper
39.04 € incl tax
Browse standard from 2.44 € incl tax
Standard monitoring

Customers who bought this item also bought

Main

EVS-EN 15259:2007

Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report
Newest version Valid from 05.12.2007
Main

EVS-EN 12619:2013

Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
Newest version Valid from 05.02.2013
Main

EVS-EN 13284-1:2002

Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
Withdrawn from 17.11.2017
Main

EVS-EN 14789:2005

Stationary source emissions - Determination of volume concentration of oxygen (O2) - Reference method - Paramagnetism
Withdrawn from 03.02.2017