Skip to main content
Back

EVS-EN ISO 16834:2012

Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO 16834:2012)

General information

Valid from 05.06.2012
Base Documents
ISO 16834:2012; EN ISO 16834:2012
Directives or regulations
None

Standard history

Status
Date
Type
Name
Main
prEN ISO 16834
05.06.2012
Main
This International Standard specifies requirements for classification of wire electrodes, wires, rods and all-weld metal deposits in the as-welded condition and in the post-weld heat-treated (PWHT) condition for gas shielded metal arc welding and tungsten inert-gas welding of high-strength steels with a minimum yield strength greater than 500 MPa, or a minimum tensile strength greater than 570 MPa. One wire electrode can be tested and classified with different shielding gases. This International Standard is a combined specification providing for classification utilizing a system based upon the yield strength and the average impact energy of 47 J of all-weld metal, or utilizing a system based upon the tensile strength and the average impact energy of 27 J of all-weld metal. - Clauses, subclauses and tables which carry the suffix letter “A” are applicable only to wire electrodes, wires, rods and deposits classified according to the system based upon the yield strength and the average impact energy of 47 J of all-weld metal under this International Standard. - Clauses, subclauses and tables which carry the suffix letter “B” are applicable only to wire electrodes, wires, rods and deposits classified according to the system based upon the tensile strength and the average impact energy of 27 J of all-weld metal under this International Standard. - Clauses, subclauses and tables which do not have either the suffix letter “A” or the suffix letter “B” are applicable to all wire electrodes, wires, rods and deposits classified under this International Standard.

Required fields are indicated with *

*
*
*
PDF
15.86 € incl tax
Paper
15.86 € incl tax
Browse standard from 2.44 € incl tax
Standard monitoring

Customers who bought this item also bought

Main

EVS-EN ISO 14341:2011

Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2010)
Withdrawn from 15.10.2020
Main

EVS-EN ISO 18275:2012

Welding consumables - Covered electrodes for manual metal arc welding of high-strength steels - Classification (ISO 18275:2011)
Withdrawn from 16.10.2018
Main

EVS-EN ISO 2560:2009

Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification
Withdrawn from 15.01.2021
National annex

EVS-EN 1993-1-3/NA:2008

Eurocode 3 - Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting. Estonian National Annex
Valid from 07.04.2008