Skip to main content
Back

EVS-EN 62271-100:2009/A1:2012

High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers (IEC 62271-100:2008/A1:2012)

General information

Withdrawn from 01.09.2021
Base Documents
IEC 62271-100:2008/A1:2012; EN 62271-100:2009/A1:2012
Directives or regulations
None

Standard history

Status
Date
Type
Name
01.09.2021
Main
04.01.2013
Amendment
04.01.2013
Corrigendum
04.01.2013
Corrigendum
04.06.2009
Main
IEC 62271-100:2008 is applicable to a.c. circuit-breakers designed for indoor or outdoor installation and for operation at frequencies of 50 Hz and 60 Hz on systems having voltages above 1 000 V. It is only applicable to three-pole circuit-breakers for use in three-phase systems and single-pole circuit-breakers for use in single-phase systems. This second edition cancels and replaces the first edition published in 2001 and its amendments 1 (2002) and 2 (2006). It also cancels and replaces IEC 61633 and IEC 62271-308. The main changes with respect to the previous edition are listed below: - the introduction of harmonised (IEC and IEEE) TRV waveshapes for rated voltages of 100 kV and above (amendment 1 to the first edition); - the introduction of cable and line systems with their associated TRVs for rated voltages below 100 kV (amendment 2 to the first edition); - the inclusion of IEC 61633 and IEC 62271-308. This standard shall be read in conjunction with IEC 62271-1, first edition, published in 2007.

Required fields are indicated with *

*
*
*
PDF
31.72 € incl tax
Paper
31.72 € incl tax
Browse standard from 2.44 € incl tax
Standard monitoring

Customers who bought this item also bought

Main

EVS-EN 50121-3-1:2017

Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle
Newest version Valid from 03.02.2017
Main

EVS-EN 60598-2-22:2014

Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting
Withdrawn from 01.07.2022
Main + corrigendum

EVS-HD 60364-4-442:2012

Low-voltage electrical installations - Part 4-442: Protection for safety - Protection of low-voltage installations against temporary overvoltages due to earth faults in the high-voltage system and due to faults in the low voltage system
Newest version Valid from 03.02.2012
Main + corrigendum

EVS-HD 60364-5-52:2011

Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems
Valid from 05.04.2011