Skip to main content
Back

EVS-EN 61462:2007

Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations

General information

Withdrawn from 01.11.2023
Base Documents
IEC 61462:2007; EN 61462:2007
Directives or regulations
None

Standard history

Status
Date
Type
Name
01.11.2023
Main
05.12.2007
Main
This International Standard applies to composite hollow insulators consisting of a load-bearing insulating tube made of resin impregnated fibres, a housing (outside the insulating tube) made of elastomeric material (for example silicone or ethylene-propylene) and metal fixing devices at the ends of the insulating tube. Composite hollow insulators as defined in this standard are intended for general use (unpressurized) or for use with a permanent gas pressure (pressurized). They are intended for use in both outdoor and indoor electrical equipment operating on alternating current with a rated voltage greater than 1 000 V and a frequency not greater than 100 Hz or for use in direct current equipment with a rated voltage greater than 1 500 V. The object of this standard is: – to define the terms used; – to prescribe test methods; – to prescribe acceptance criteria. This standard does not prescribe impulse voltage or power frequency voltage type tests, nor does it prescribe pollution tests because the withstand voltages are not characteristics of the hollow insulator itself, but of the apparatus of which it ultimately forms a part.

Required fields are indicated with *

*
*
*
PDF
26.84 € incl tax
Paper
26.84 € incl tax
Browse standard from 2.44 € incl tax
Standard monitoring

Customers who bought this item also bought

Main

EVS-EN 60358-1:2012

Coupling capacitors and capacitor dividers - Part 1: General rules
Newest version Valid from 05.09.2012
Main

EVS-EN IEC 60358-4:2018

Coupling capacitors and capacitor dividers - Part 4: DC and AC single-phase capacitor dividers
Newest version Valid from 03.12.2018
Main

IEC TS 60815-1:2008

Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 1: Definitions, information and general principles
Newest version Valid from 29.10.2008
Main

IEC TS 60815-3:2008

Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 3: Polymer insulators for a.c. systems
Newest version Valid from 29.10.2008