Skip to main content
Back

EVS-EN 1751:2014

Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valves

General information

Withdrawn from 03.06.2024
Base Documents
EN 1751:2014
Directives or regulations
None

Standard history

Status
Date
Type
Name
03.06.2024
Main
04.03.2014
Main
01.07.2001
Main
EVS-EN 1751:2001
This European Standard specifies methods for the testing and rating of dampers and valves used in air distribution systems with pressure differences up to 2 000 Pa.
The tests incorporated in this European Standard are:
a)  leakage past a closed damper or valve (for classification see Annex C);
b)  casing leakage (for classification see Annex C);
c)  flow rate/pressure requirement characteristics;
d)  torque: (see Annex A);
e)  thermal transmittance: (see Annex B).
The acoustic testing of dampers and valves is not included in this European Standard.
The tests specified above apply to the following:
f)  measurement of leakage past a closed damper or valve;
g)  measurement of casing leakage;
h)  determination of flow rate and pressure requirements;
i)  measurement of torque characteristics (see Annex A);
j)  measurement of thermal transfer characteristics to determine insulation properties (see Annex B).
NOTE  Certain aspects of the dynamic performance of dampers or valves are dependent upon the air distribution system to which they are connected and are, therefore, difficult to measure in isolation. Such considerations have led to the omission of these aspects of the dynamic performance measurements from this European Standard. Also, in common with other air distribution components, the results from tests carried out in accordance with this European Standard may not be directly applicable if the damper or valve is situated in an area of non-uniform flow.

Required fields are indicated with *

*
*
*
PDF
24.40 € incl tax
Paper
24.40 € incl tax
Browse standard from 2.44 € incl tax
Standard monitoring

Customers who bought this item also bought

Main

EVS-EN 1866-2:2014

Mobile fire extinguishers - Part 2: Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1
Newest version Valid from 05.06.2014
Main

EVS-EN ISO 12999-1:2014

Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation (ISO 12999-1:2014)
Withdrawn from 01.12.2020
Main

EVS-EN 1886:2007

Ventilation for buildings - Air handling units - Mechanical performance
Newest version Valid from 08.01.2008
Main

EVS-EN 50647:2017

Basic standard for the evaluation of workers' exposure to electric and magnetic fields from equipment and installations for the production, transmission and distribution of electricity
Newest version Valid from 16.06.2017